Click pictures



The PEMF-ST is used with an Ultra BEP mat or an Ultra Concentrator.

It has built the ability to select a pulse rate and program the amount of time for the program to run, and the unit shuts off automatically at the end of a program.

Instructions for Operation


Technical Resources: Answers to Questions you have

Instructions for Operation

The PEMF-ST system consists of an PEMF-ST Control Unit and an Ultra PEMF Mat or PEMF Concentrator.

1. Plug the cord from the Ultra PEMF Mat or Concentrator into the rear of the Control Unit. Plug the Control unit into an AC wall outlet with the supplied power cord.

2. Press "On/Off" momentarily to Power On

3. Press "Up" or "Down" and "Next" to change the Run Minutes

4. Press "Up" or "Down" and "Next" to change the Frequency

5. Press "Up" or "Down" and "Next" to select the Intensity

7. Program starts, displaying On and remaining time

8. Press "Next" to change Frequency while running

9. Press "Next" again to change Intensity while running

10. Press "Next" again to change Minutes while running

11. Auto Shutoff at the end of the program

12. Press "On/Off" momentarily to manually shutoff


Model: PEMF-ST
Low Duty Cycle High Intensity Magnetic Pulses
Powered by 120-240VAC 50/60Hz Household Power

Bi-directional Polarity Pulse Fields, Floating
Energy type

Magnetic Pulses
Frequency Modes of Operation
Single Frequency
Waveform Type Variable Pulse Width
0 to 107 usec
Linear Ramp Up/Linear Ramp Down
Range 1 to 100 Hz

Resolution 1.00000 to 9.99999 Hz (0.00001 Hz)
10.0000 to 99.9999 Hz (0.0001 Hz) and 100 Hz
1 Individual
16 Levels
1 to 60 Minutes
Auto Shutoff
Power Output
50 mJoules per Pulse Max
Mat Gauss: 47, Mat Area: 15-1/2 Square Feet
Concentrator Gauss: 350, Concentrator Area: 7 Square Inches

BCX Ultra Products and accessories are sold
through Distributors Internationally.

Copyright 2019