The FIR-ST is used with an Ultra FIR mat.

It has built in programs with sequences of selected frequencies.

The user can set the amount of time for the program to run, and the unit shuts off automatically at the end of a program.

Instructions for Operation


Technical Resources: Answers to Questions you have

Instructions for Operation

The FIR-ST system consists of an FIR-ST Control Unit and an Ultra FIR Mat.

1. Plug the cord from the Ultra FIR Mat into the rear of the Control Unit. Plug the Control unit into an AC wall outlet with the supplied power cord.

2. Press "On/Off" momentarily to Power On

3. Press "Up" or "Down" and "Next" to change the Program

4. Press "Up" or "Down" and "Next" to select the Run Hours

5. Press "Up" or "Down" and "Next" to select the Power Level

6. Program starts, displaying the Frequency

7. Press "Up" or "Down" and "Next" to change Power Level while running

8. Frequencies sequence automatically

9. Press "Next" to Manually advance frequencies

10. Auto Shutoff at the end of the program

11. Press "On/Off" momentarily to manually shutoff

Click Here for Program and Frequencies


Model: FIR-Ultra
Deep Heat Device
Powered by 120-240VAC 50/60Hz Household Power

Un-Balanced, Floating
Energy type

Far InfraRed
Frequency Modes of Operation Pulse Width Modulation
Waveform Type Squarewave
Range 1 to 10,000 Hz

Resolution 1.0000 to 9.9999 Hz (0.0001 Hz)
10.000 to 99.999 Hz (0.001 Hz)
100.00 to 999.99 Hz (0.01 Hz)
1,000.0 to 9,999.9 Hz (0.1 Hz) and 10,000 Hz
1 Individual
Programs 23
Sequences Up to 22 Sequences per program
6 Levels
1/2 to 5 Hours in 1/2 Hour Increments
Auto Shutoff
Power Output
150 Watts Max

BCX Ultra Products and accessories are sold
through Distributors Internationally.

Copyright 2019